Used Dividing heads for sale (105)

Condition: good (used), rotary table, rotary indexing table, dividing head, dividing head Crslowc Sgzon E E E Aob -Dividing head:Dividing head with three-jaw chuck -Type: unfortunately without type designation -Three-jaw chuck: Ø 137 x 70 mm, inner Ø 37 mm -Spindle bore: Ø 25 mm -Dimensions total: 510/480/H250 mm -Weight: 69 kg

Condition: as good as new (ex-display), centre height 130 mm spindle bore 18 mm ratio 40:1 swivellable - 10° bis 90° ° Croleuvd Axsn E E E Aeb groove width 16 / 18 mm weight 35 kg dimensions of the machine ca. 0,5 x 0,25 x 0,25 m Unused semi-universal dividing set: - Spindle in precision tapered roller bearings - Phosphor bronze worm wheel, helix Cr-NI steel, hardened and ground - Translation disengageable for direct sharing - each division 2 to 50 and many divisions to 380 accessories: Tailstock, 2 part washers, centering point, driver and chuck flange Machine dealer with own stock of 1600 m².

Condition: excellent (used), Dividing Head / Quick Divider Manufacturer: Unispa 24-degree direct division Csln E E Eev S Ar Is Aorb 1-degree increments with handwheel Center height: 135 mm (28604) Stock number Length: 470 mm Depth: 300 mm Height: 260 mm Weight: 60 kg

Condition: as good as new (ex-display), Year of construction: 2022, machine/vehicle number: 0815, Compact large precision CNC rotary table with control unit, suitable for single part or small series production in mechanical engineering, horizontal or vertical assembly is possible. Immediately available - Made in Germany - Csln E Eobatamj E Ajrb The dividing head is particularly suitable as 4th axis on engraving and milling machines for milling, engraving, lasering, drilling, grooving or for use on a tool or surface grinding machine. Square, hexagonal, gear milling of any pitch or 3D machining is possible. Extremely precise and accurate worm gear is designed with a maximum reduction ratio of 100:1, which was specially designed by us and is not standard. Output torque far above 70 Nm. The max. clamping diameter is 250 mm. The peak height is 125 mm. The drive is made by a controlled stepping motor of 200 steps with 7,5 A with a holding torque 9,7 Nm. Possible adjustable graduation accuracy at the output: 0,00028125 degrees with 1/64 step programming. The worm pair has four ball bearings and is adjusted backlash-free, also adjustable.the bearings are from FAG/SKF. The one-piece stable output spindle is equipped with a face plate d=200 mm with inner taper MK 3 and through hole 20,3.Weight 26 Kg Accessories: opt. USB-data lever for programming. opt. Sealing air connection. opt. 200mm three jaw chuck opt.guard plate with intgr. sewing switch for auto-operation Quickly are key surfaces, a difficult ska

Condition: like new (used), Year of construction: 2020, CNC-4 axis dividing head for CNC BAZ - CNC milling machine Fabr.HOFMANN Type : HOWIMAT CNC 160.2 / Z - LEAN Bj.2020 Mint condition Only test run . Control Hofmann CPS 20 Spindle bore : 80 mm Chuck Röhm ZS 160 . Crjlou Et Scon E E E Ajb Documentation available . More data pull data sheets .

Condition: used, Year of construction: 2001, centre height 160 / 180 mm Control NC total power requirement ? kW Celn E Esup H Rlo E Asrb weight of the machine ca. 120 kg dimensions of the machine ca. 500 x 230 x 270 mm

Condition: good (used), Rotary table, rotary indexing table, dividing head, dividing head Csln E E Eefk Affs Aorb -Dividing attachment with: three-jaw chuck and crank -Chuck: Ø 160 mm -Dividing head: rotatable, swiveling -Dimensions: 540/470/H250 mm -Weight: 67 kg

Condition: excellent (used), Year of construction: 1976, centre height 76 mm centre distance 190 mm Creleu Twclon E E E Asb spindle bore 21 mm taper MK 3 weight of the machine ca. 40 kg dimensions of the machine ca. 720 x 210 x 215 mm

Condition: used, Dividing head Sip clamping surface diameter 300 mm 8 T grooves 12 mm wide swivelling 0 - 90 degrees length 800 mm Crslecv S Nvon E E E Aob width 600 mm height 300 mm Weight 120 KG

Condition: good (used), centre height 220 mm table diameter 220 mm Crsln E E Eju Sbl Re Aeb 250mm - chuck - 3 jaws 80mm passage Can be used vertically and horizontally Standing tip height 220mm

Condition: good (used), used dividing head with a 3 jaw chuck from Röhm (110 mm). Crsljvtqllsn E E E Aeb

Condition: good (used), Center height: 125 mm Cjlnsg Hzbfe E E E Asrb Bore: 25 mm Space requirement: 500 x 400 x 250 mm high including four-jaw chuck AROWA 200 mm Ø with tailstock MT 2

Condition: good (used), Rotary table, rotary indexing table, dividing head, dividing head -Manufacturer: Reckermann, dividing head with: three-jaw chuck -Type: UTA 125 Creln E Eehikzwj E Asb -Three-jaw chuck: Rohm Ø 160 mm, inner Ø 32 mm -Spindle bore: Ø 25 mm -Dimensions: 500/420 / H220 mm -Weight: 54 kg

Year of construction: 1987, Condition: used, centre height 390 mm passage of steadyrest 220 mm Cjlnjhgw Uxj E E E Ajrb chucking diameter 400 mm total power requirement / kW

Condition: used, machine/vehicle number: 2502, DESCRIPTION Dividing head make Walter Type HT 200 U Tip height 200 mm Recording SK 50 Spindle diameter 130 mm Weight 260 kg Space required: T. 500 x B. 650 x H. 450 mm DMT0Z2OCZN9 Croln E Ejc Tuyre E Aob

Condition: used, Used 5th 160 mm axis with hydraulic clamp and Siemens servo motors. Located in Estonia, eU Creln E E Eowbuabj Ajb

Condition: used, machine/vehicle number: 7979, Table Ø: 400 mm Table with 8 T-slots: 12 mm Overall height: 175 mm Space requirement: 600 x 450 x 175 mm Weight: approx. 100 kg Cslob Ez R Ujn E E E Ajrb

Condition: good (used), gear, gears, gear shaft, pinion shaft -Gear shaft: straight-toothed pinion shaft -Gear: Diameter Ø 42 mm / 14 teeth -Tooth width: 83 mm -Dimensions: see photo technical drawing -Number: 9x gear shaft available Crjln Eewcxtzs E E Aob -Price: per piece -Total dimensions: Ø 42 x 220 mm -Weight: 0.9 kg/piece

Condition: good (used), Dividing head with 24 he direct Division or crank to Scala 200 he Röhm feed GES. Height 165 mm Cjln Ejdx D Rzs E E Aerb Depth 350 mm Width: 300 mm Weight 34.5 kg

Condition: good (used), Tailstock, counter bearing for dividing head, dividing head, lathe -Tailstock: for dividing head -Shaft: Ø 50 x 515 mm Cjln E Ejwag Uhs E Asrb -Dimensions: see photos -Dimensions: 645/90/H200 mm -Weight: 7.8 kg

Condition: good (used), Grinding wheel puller, cup wheel puller, double grinding stand puller, surface grinding machine puller, cylindrical grinding machine puller, pulling head, dressing head for grinding machines, grinding wheel dresser, radius dresser, disc puller Crelnov Sqy Tj E E E Aob -Puller: groove width 12 mm -Dimensions: see drawing in the photos -Dimensions: 150/130/H80 mm -Weight: 2.0 kg

Condition: excellent (used), Spiral milling device, dividing head, dividing apparatus, rotary table, rotary table dividing head, spiral milling device with all accessories -comes from: a Deckel FP2 -Dividing head: spiral milling device with all accessories change gears, dividing disks -Tip width: 415 mm -Recording: SK40 -suitable for: milling cutter grinding -Translation: 1:40 Colnjd E Hlbj E E E Aorb -Dividing head: swiveling -Dimensions: 820/390/H440 mm -Weight: 80 kg

Condition: good (used), Dividing head, dividing apparatus Dividing head, dividing apparatus, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder, milling cutter grinding holder -Manufacturer: Zeatz, dividing head Cabezal Divisor Universal Crelot Hmh Son E E E Asb -Tip height: 150 mm -Three-jaw chuck: Bison Ø 160 mm, bore Ø 40 mm -Parting head: swiveling 90° -Spindle bore: Ø 28 mm -Dimensions: 470/440/H240 mm -Weight: 61 kg

Condition: used, tailstock, counter bearing for dividing head, dividing head, lathe -Tailstock: center height 150 mm Coln E E Esu Rv Scj Aerb -Dimensions: see drawing in the photos -Dimensions: 210/105/H240 mm -Weight: 7.0 kg

Condition: used, Rotary table, rotary indexing table, dividing head, dividing head Crsln E Ejdzzhhs E Aeb -Three-jaw chuck: Ø 190 mm -Height: 320 mm -Bore center: Ø 57 mm -Rotary table: swiveling -Dimensions: 360/310/H320 mm -Weight: 64 kg