Used Building material fabrication for sale (60)

Condition: used, Year of construction: 1991, 2 used feed/dosing hoppers Capacity: approx. 7 m³ Dosing belt 800 mm x 2 m and 3.8 kW Feb Enasv T Ahle Aaegb with steel substructure

Year of construction: 2008, Condition: ready for operation (used), A total of four Scholz autoclaves are available for the preparation of sand-lime bricks or concrete. Volume: 60m³/60000l, temperature range: 0°C-203°C, operating pressure: 16bar, test pressure: 26bar. Documentation available. On-site inspection is possible. Fgeb Ena Aewd Ta Eoasb

Condition: used, Functionality: fully functional, power: 26 kW (35.35 HP), fuel type: electric, Year of construction: 2002, Dual-axis continuous mixing dampening mixer: currently used for mixing clay and chamotte for the production of ceramic products. Other products can be mixed. Sale due to discontinuation of business Feb Enaev Tk Dze Aajgb

Condition: ready for operation (used), Stichweh double scoop wheel Type DS 3011/09 Bl95 Year 2002 Drive 11 kW weight 21,400 kg Wheel diameter 3000mm Wheel width 1100mm and 900mm Fjb Enasrt R I Eo Aajgb Trough length approx. 8m Capacity up to 80 t/h sand Water volume up to 250 m3/h Gearbox recently renewed; an overhauled replacement gearbox is included Replacement dewatering screen linings Good operational condition

Year of construction: 2023, Condition: new, Dosing system serial doser for the production of mineral mixtures, FSS, STS, KG 1/2 etc. semimobile unit, dosage, dosificación 4 chambers each about 22 m³, hourly output eff. 720 tons, , 900 recipes can be set, direct loading onto Trucks Fgjbsgpk E Dj Ena Aaeb

Condition: excellent (used), Functionality: fully functional, Year of construction: 2002, We offer a used PENTA rumbling system for paving stones, year of construction 2002. Fgjb Eorzt Nkjna Aasb Fully functional, very good condition.

Condition: excellent (used), Wheel-mounted row doser 4 new individual dosing units with a capacity of approx. 15 cbm each Incl. collecting belt/dispensing belt Manual discharge pusher Fgeb Enajtq Sm Ro Aaeb Diesel generator Discharge collection conveyor belt, foldable for transportation Wheeled mobile from 1-axle semi-trailer chassis

Year of construction: 2013, Condition: ready for operation (used), Functionality: fully functional, Automated machine for the production of FERT beams, Production of fert ceiling elements, Concrete Floor Beam Machine For sale is a top-quality automated machine for the production of FERT beams (prefabricated concrete beams with clay hollow blocks, with steel supports filled with concrete), manufactured in 2013 by the renowned Italian company SIMEM SCHIASLO SPIL. Technical characteristics: Manufacturer: SIMEM SCHIASLO SPIL (Italy) - specialized in the production of fert beams (brick beams) and lintels - year of production: 2013 - condition: Excellent, fully functional and ready for use Automation: - automatic dosing and mixing of concrete - vibrocompacting and casting into brick molds - automated taking and placing of brick molds into the production process - automated stacking of finished FERT beams on pallets or in the storage area Purpose and advantages: - Industrial production of FERT beams, concrete lintels and lattice girders Fgeb Enowdvviea Aajb Advantages: - high productivity with maximum automation of all key processes - reduced need for manual labor - precise and uniform quality of each product - automatic flexibility in adjusting dimensions and types of beams - optimized work process with fast delivery of finished elements Location: Croatia Contact: For additional information, price and agreement on inspecting the machine, please feel free to contact me.

Year of construction: 2023, Condition: new, New blow bars for e.g. SBM 10/6/4 Export, or Tesab RK 623, chrome hard casting, dimensions approx. 610 x 264 x 123 mm, approx. 103 kg. Available immediately, subject to prior sale. Fob Enasq Ecw He Aaogb

Year of construction: 2023, Condition: new, 1.) Applications: Production of concrete blocks for: masonry, foundation, pillars, floor, belt, chimneys; gutters and gutter covers; 2.) Advantages: - High productivity - the active surface of the mold 1200 x 800mm (12 masonry blocks 400x200x200mm) - Hydraulic actuation - Teflon bushing of the sliding bearings on the guide columns - Reliable mechanical and hydraulic systems. - Operator seat - Concrete hopper – 700 liters - Drawer for concrete supply to the mold – hydraulically operated - 2 vibrators on the punch plate - 4 electric motovibrators - mold vibration - Automatic stop of vibration when unpacking - Polyurethane coated wheels + Hydraulically actuated wheel to change the direction of travel - Large variety of molds - Allows the installation of molds with a height of 370mm - can produce roadable ditches and open ditches 3.) Technical characteristics: - Maximum mold dimensions: 1200x800mm - Maximum finished product height: 370mm - Duration of a cycle: 60 seconds - Hopper capacity: 700 liters Fob Ensiwxrgea Aaogb - Installed power: 15 kW - Supply voltage: 380V - Overall dimensions: 3.30 x 2.30 x 4.00m - Mass of the machine (with mold): 4000 kg - Vibration frequency: 3000rpm - Required amount of semi-dry concrete: 8 m3/hour - Recommended mixer: SAB6MC automated concrete station

Year of construction: 2024, Condition: new, 1 x-8way linear mixer with mixer and humidification swing band 720to / h hourly Output, 6 chambers per 22.5 cbm, expandable. Mixing plant for RC and rock drilling for the production of mixed lines Such as frost protection, gravel support layer, factory mix concrete surcharge, screed sand 2-8, Drainage filter layers, carrier layers for railway construction, recycling lines with Automatic control for fast truck loading directly from the driver. Fgjbsd D Hqio Ena Aasb Up to 900 recipes freely programmable Expandable to all needs Price on request and delivery 720to / h hourly output ,8 chambers per 22.5 cbm, expandable. Mixing plant for RC and rock drilling for the production of mixed lines Such as frost protection, gravel support layer, factory mix concrete surcharge, screed sand 2-8, Drainage filter layers, carrier layers for railway construction, recycling lines with Automatic control for fast truck loading directly from the driver. Up to 900 recipes freely programmable Expandable to all needs Price on request and delivery 720to / h hourly output at 6 chambers per 22.5 cbm, expandable. Mixing plant for RC and rock drilling for the production of mixed lines Such as frost protection, gravel support layer, factory mix concrete surcharge, screed sand 2-8, Drainage filter layers, carrier layers for railway construction, recycling lines with Automatic control for fast truck loading directly from the driver. Up to 900 recipes freely programmable Expandable to all needs Price on request and delivery

Condition: excellent (used), Offered is a used feed hopper with pre-screening. Manufacturer: Haver & Boecker. Year of manufacture: 1995. Fgsb Eev N H Hdsna Aaob Type: UF 1200x3650. Very good condition, fully functional.

Condition: excellent (used), Plant is for mixing clayey soils Fsb Enjtrmvfea Aajgb Chain conveyor 800 x 7,000 mm with feed hopper, electric drive and adjustable gearbox 2-shaft compulsory mixer HÄNDLE approx. 900 x 3,500 mm, with electric drive and gearbox both on semi-mobile steel construction with electric installation

Condition: used, I would like to represent you our Spancrete GT-240 machines equipment and belongings list in the pictures attached. If you are interested in buying this machine please contact me. Spancrete GT240 hollowcore slipforming machine 15 cm standard hollowcore floor slab 2x1,2 m wide Fgeb Ena Aewc S Nvsajb 20 cm standard hollowcore floor slab 2x1,2 m wide 30 cm standard hollowcore floor slab 2x1,2 m wide 15 cm standard hollowcore wall panels 1x2,4 m wide 15 cm standard hollowcore wall panels 2x1,2 m wide 20 cm standard hollowcore wall panels 1x2,4 m wide 25 cm standard hollowcore floor slab 2x1,2 m wide 25 cm standard hollowcore wall panels 1x2,4 m wide Accessories for 14x140mmx 190mm E-beams Spancrete bridgesaw 2,4 mw/Angle Cutting Upgrade Spancrete wire rabbit Hydraulic Tensioning Unit Bucket 3 m3 2 pieces We only use it for 36 months.(2006-2019)

Condition: excellent (used), Functionality: fully functional, Year of construction: 2006, Production Line for Concrete Blocks and Slabs – MASA (GERMANY) Year of Production: 2006 Technical Condition: Very Good Line Components: - MASA R9001XL single-feed vibropress - HAARUP B4500/1 mixer with skip - Stacking elevator - Multi-forklift - Conveyors for wet and dry line - Gripper for placing products on transport pallets - External pallet conveyor - Production pallet rack – 5200 spaces - 4000 wooden production pallets – plywood, dimensions 1200x1100x40 mm Fgjb Enajv N Ru Se Aajb - Horizontal strapping machine

Year of construction: 2023, Condition: new, Machine equipped with complete formworks (rotating hade, 5 steel rings, outer formwork) for pipe with diameters: Dint=1000mm si Dint=800mm; - The equipment can manufacture unreinforced concrete pipes with connection sockets: Dint=1000mm; Dint=800mm; Dint=600mm; Dint=500mm; Dint=400mm; Dint=300mm; - Maximum height of pipe: 1000mm; minimum height of pipe: 250mm - Vertical translation of the rotating head – electric engine - Variable revolution of the rotating head (frequency converter) - Sizes: 2.0x2.0x4.2 meters - Mass≈2000 kilograms - Power: 16 kW (supply voltage: 380V) - Average productivity: 1 pipe / 6 minutes - Loading of the machine with concrete: manual; (optional – by conveyor belt) - Manipulating the formwork with the concrete pipe inside: with the forklift; - Recovery of the formwork: immediately. - Recovery of the ring: after 2-3 days, depending on the ambient temperature. - The frequency converter allows adjustment of speed according to the inside diameter of the pipe. - Changing the rotating head is simple and fast. Fob Enasiy Dl Hj Aaegb - Rotating heads are lined with interchangeable wear resistant steel sheets. EQUIPMENT REQUIRED: - MX500L Concrete Mixer with aggregate loader: concrete preparation - Conveyor: transport of concrete from the mixer to the formwork. Steel rings for the lower plug - The production surface must be perfectly flat!

Year of construction: 2008, Condition: good (used), Functionality: fully functional, Lengstransport roll 12 t 2 rolls of 6 t each used but still in good condition Fgsbov Iyzxs Ena Aaob Payment before delivery

Year of construction: 1997, Condition: ready for operation (used), Wire diameter (single wire): 6mm-14mm, wire diameter (double wire): 6mm-10mm, maximum bending angle: 180°, motor power: 22kW, feed rate: 1.5m/s, bending speed: 1000°/s, cutting time: 0.4s, hydraulic tank volume: 300l. Machine dimensions X/Y/Z: approx. 4900mm/1640mm/2200mm, weight: approx. 3300kg. Control system defective. Documentation available. On-site inspection is possible. Fgebouwrv Dj Ena Aasb

Condition: excellent (used), Year of construction: 1972, Offered is a used ceramic ball mill from Keramische Werke Hermsdorf. Built in 1972. Fully functional, very good condition. Fob Enovu T Ekoa Aasgb

Condition: new, Applications: Production of concrete blocks for wall, foundation, pillars, roofs, chimneys. Production of concrete pieces for water drainage Advantages: optimal distance between the mould and the over-mould ensures a comfortable position for the operator - Handling the steering wheel requires minimal effort thanks to a gear force reducer; - Simple operation and maintenance professional vibrator with low power consumption Automated stopping of the vibration once demolding occurs Wide variety of molds - there is the possibility of installing moulds for high concrete elements (maximum 370mm)* Fgjb Eneiwut Tea Aaob Technical specifications: Maximum mold dimensions: 800x500mm Maximum height of end product: 370mm Cycle duration: 60 seconds Supply power: 0.28kW Supply voltage: 220V Overall dimensions: 1.35x 1.55 x 1.7 m Machine weight (including a mold): 400 kg Vibrator rotation speed: 3000rpm Concrete consumption: 2 m3/hour Recommended concrete mixer: MX300L

Year of construction: 2007, Condition: ready for operation (used), Sand feeding/mixing/reactors (modernized in 2007):Control system: Siemens S7, number of machines: 23.5x Jöst discharge chutes, sand screen, mixer, Eirich UE 62 discharge unit, bucket elevator, reactors, twin-shaft mixer, various weighing belts and conveyor ss plant (modernized in 2012):Control system: Siemens S7, number of machines: 6.2x Atlas presses incl. table removal and stacking device, scraper, empty trolley platform and Semet turntables, Atlas blank transfer table, 2 press tools in use and 22 additional tools available, various conveyor dening shop/steam boiler (modernized in 2015):Control system: Siemens S7, number of machines: f boiler standard burner Saacke, 9x hardening boiler Scholz with automatic condensate drainage, water treatment Grünbeck, condensate collection tank, low-pressure feed water tank, approx. 130 hardening kaging system (modernized in 2014):Samet pallet packaging system with automatic film shrinking machine, package size: approx. 1m x 1m x 1m, control system: Siemens S7, number of machines: 9.Semet pull-out platform, compactor in longitudinal direction, trolley removal gripper, transfer table, slat conveyor, turnover gripper, pallet loading gripper with travel path, Erapa Lenzen combination shrink unit, various chain conveyors and travel ual NFE with 2-shift work: 15 on-site visit is possible. Fgjberzuaqo Ena Aaeb

Year of construction: 2024, Condition: new, ~ SPEED 700 , SEMI AUTOMATED ~ APPLICATIONS Production of: - paving - kurbs - concrete blocks for: -masonry -foundation blocks -posts, floor slabs -chimneys, -gutters -roadway gutter covers. ADVANTEGES : - Vigorous vibration coupled with hydraulic pressing of the concrete guarantees high quality concrete products. - Vibrators mounted on the counter mold play an important role in concrete compaction. - Chrome-plated pipe guide columns - Teflon-coated sliding bearings - Our wide range of molds can provide a diverse production. - Reliable mechanical and hydraulic systems. OPERATE : ~ Mostly manual: -Drawer(back/ fort -Mold (up/down) -Counter Mold (up/down) ~ Commands executed automatically: -start/ stop vibration when reaching height -start/ stop pallet feeding exhaust line stop) COMPONENTS: 1.) the press 2.) pallet stacking space 3.) pallet feeding line 4.) concrete bunker 5.) drawer (1) for concrete mold feeding 6.) pallet discharge line with fresh products 7.) hydraulic unit 8.) lever panel for the machine operator TEHNICAL FEATURES: - Pallet dimensions: 700x670x40mm - Active surface: 640x640mm - Minimum/maximum finished product height: 40mm/ 250mm - Vibration frequency: 3000rpm - Hydraulic pump flow: 40 l/min - Cycle time: 60 -100 sec (Semi-automatic version) - Cycle time: 30 – 50 sec (Fully automated version) - Installed power: 15.50 kW - Hydraulic power unit: 7.5 kW - Vibrating table vibrators: 6.00 kW + 0.28 kW - Counter mold vibrators: 0.80 kW - Discharge line: 0.55 kW - Supply voltage: 380V OVERALL DIMENSIONS: Width: 1.60m (without hydraulic unit and control panel) Length: 5.60m Height: 2.85m Machine mass (without mold): 4,000 kg Approx. mold mass: 250 - 300kg ADDITIONAL PRODUCTS / OPTIONAL: 1.) AUTOMATIC OPERATION : ( + 6.300 euro ) - PLC (Mitsubishi Electric) logic programmer + touch display + software for automatic machine operation Reduces the time of a production cycle, higher productivity (30 -50sec) 2.) SECOND DRAWER (2) for finishing layer for paver and kurbs + BUNKER ( + 3.900 euro ) Fjbjhufyhs Ena Aaogb 3.) CONCRETE MINISTATION SEMIAUTOMATED ( + 18.800 euro) Component parts: a.) Sand bunker 2 m2 + Volumetric dosing with conveyor belt + Vibrator b.) Gravel bunker 2 m2 + Volumetric dosing with conveyor belt c.) Electric control panel d.) Concrete Mixer MX 300 ( Fluid concrete: 300 liters Semi-wet concrete: 200 liters, 2.4 cubic meters of semi-wet concrete/hour ) 4.) AUTOMATIC LIFT (elevator) ( + 4.000 euro) 5.) CONVEYOR 6M , for transporting the concrete to the machine bunker ( + 4.000 euro) - Band width: 500mm - 7mm smooth rubber mat with 3 inserts - Motor 1.5kW (380V) PLEASE FOR THE COMPLETE OFFER SEND US AN EMAIL.

Condition: new, COMPONENT PARTS: 1.) Sand bunker 2mc: Fsb Ena Ajiz Dl Isaegb -Volumetric dosing with conveyor belt - 1.5 kW motor -Vibrator 0.18 kW - Gravel bunker 2 m2 -Volumetric dosing with conveyor belt - 1.5 kW motor 2.) Electric control panel: „ Start/stop mixer „ Start sand conveyor- the conveyor will stop after the preset time from the time relay " Start gravel conveyor - the conveyor will stop after the preset time from the time relay „ Water quantity setting (digital display) 3.) MIXER, MX500 / MX300: -The tub is lined with an interchangeable jacket made of hardox sheet 4mm; -Padded bottom with removable wear elements (10mm) - Interchangeable mixing hoes made of hardox sheet -Protective net MX500: -Useful volume: fluid concrete 500 liters -Precast concrete: 350 liters -Productivity: 3.5 cubic meters of semi-wet concrete/ hour -Engine power: 11 kW (380V) -Dimensions: 1.70 x 1.70 x 1.40 m - Mass: 900 kg MX300: -Useful volume: fluid concrete 300 liters Precast concrete: 200 liters -Productivity: 2.4 cubic meters of semi-wet concrete/hour - Engine power: 5.5 kW (380V) - Dimensions: 1.40 x 1.40 x 1.40 m - Mass: 650 kg OPTIONAL PARTS: 1.) WEIGHING CEMENT: -Steel funnel with pneumatic opening; -Compressor; -Pneumatic vibrator; -Load cell; - Digital weight indicator - mounted on the electrical control panel. -Auger for cement (connects to the bulk cement silo of the client or at the silo provided by our company) -Mixer cover for blocking cement dust 2.) CEMENT SILO -Capacity: 24 cubic meters (30 tons of cement) -The silo is equipped with a ladder, a railing on the lid and a supply pipe with a quick coupler. -The silo is equipped with a filter, pressure release valve, level indicators, fluidizers and a butterfly valve on the discharge mouth. -Inner diameter 2500 mm; -The height of the cylindrical ferrule 4500 mm; -The height of the conical bottom 1700 mm; -Total height, including railing 8700 mm. - Net mass: approximately 3000 kg. THE MACHINERY ARE NEW. The warranty period for the machines is 12 months from delivery.

Year of construction: 2023, Condition: new, APPLICATIONS: - Paving manufacture - Curb manufacture - Concrete block manufacture for: - masonry - foundation - posts - floor slabs - chimneys - scafa gutters - roadway gutter covers ADVANTEGES: - Vibrators on tamper head. - Bunker and drawer for finishing layer of paving and kerbs. - High productivity - active area 1,10 x 0,6m - Automatic operation: PLC (Mitsubishi Electric) logic programmer + touch display + software for automatic machine operation; Schneider Electric electrical command and control components - Our wide range of moulds can ensure a diversified production. - Reliable mechanical and hydraulic systems. Fgeb Ena Asht Uwpeasb COMPONENTS: - Press unit - Pallet space - Pallet feeding line - Hopper and drawer (1) for feeding the mould with concrete - Hopper and drawer (2) for making the finishing layer (paving, kerbs) - Pallet discharge line with freshly moulded products - Hydraulic unit - Electrical control panel with PLC. TECHNICAL FEATURES: - Pallet dimensions: 1240x750x45mm - Useful surface: 1100x630mm - Minimum/maximum finished product height: 40mm/ 250mm - Vibration frequency: 3000rpm - Cycle time: 35 - 60 seconds - Total Installed power: 30,00 kW MAIN DIMENSIONS : - Width: 2,10m (without hydraulic unit and control panel) - Length: 8,00m - Height: 3,10m - The hydraulic unit and control panel are placed at the side, at a distance of 1.00m from the chassis and occupy a surface area of 2m2. - Machine mass 6,000 kg

Condition: new, Motorised concrete block machine Fjb Ejhx N Nmjna Aaogb Production of concrete blocks for use in: masonry, foundation, pillars, floors and chimneys. Powerful hydraulic pressing Operator seat Concrete bunker – 500 liters Automated lift of the counter mold Mold maximum dimensions: 1200x400mm Maximum height of concrete product: 200mm Cycle duration: 45 seconds Installed power: 5.5kW Supply voltage: 380V Overall dimensions: 2.2 x 2.0 x 1.85m Mass (including mold): 2000kg Vibrator motor rotation frequency: 3000rpm Dry concrete consumption: 4 cubic meters/hour